PURPLE

PROFESSIONAL STRENGTH

INDUSTRIAL DEGREASER

DESCRIPTION

PURPLE is an extremely powerful and versatile cleaner and degreaser.  Its high performance formula is built to quickly dissolve stubborn grease and oil from engines, machinery, floors, trucks, and greasy equipment.  It is not recommended for use on aluminum. Care should be exercised when cleaning painted surfaces because it may damage paints if used too strong.  It is safe to use on iron, steel, stainless steel, galvanize, concrete, rubber, and plastic.

DIRECTIONS

Always test it on an inconspicuous area prior to use to test for adverse reaction.  PURPLE is easy and economical to use. Actual use concentration depends on the work to be done.

For light duty cleaning, dilute 1 part cleaner with 10 parts water.  Apply by spray or brush, allow to soak for a few minutes and scrub. Rinse with water.

For heavy duty cleaning, dilute 1 part cleaner with 5 parts water.  Apply by spray or brush, allow to soak for a few minutes. Scrub with a brush and rinse with water.

For degreasing, dilute 1 part cleaner with 50 parts water and apply with a hot water high pressure washer.  Rinse well with water.

Do not allow PURPLE to dry on any surface because streaking may occur.

CAUTION

CAUSES BURNS.  HARMFUL IF ABSORBED THROUGH SKIN.  Contains sodium hydroxide and 2-butoxyethanol.  Wear safety goggles and chemical resistant gloves and shoes when handling.  Eye contact may cause severe burns or blindness. Immediately flush eyes with water for at least fifteen minutes, holding eyelids open to insure complete flushing, and get medical aid.  Skin contact may cause severe irritation or burns, flush thoroughly with water. Swallowing may cause severe irritation or damage to the mucous membranes of the mouth, throat, and digestive tract.  If swallowed, DO NOT INDUCE VOMITING, immediately drink water to dilute and get medical aid. If inhaled, get fresh air, and get medical aid.

WARRANTY

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond replacement of defective product is offered.

Compound HD50

COMPOUND HD50

PROFESSIONAL STRENGTH

INDUSTRIAL DEGREASER

DESCRIPTION

It is an extremely powerful and versatile cleaner and degreaser.  Its high performance formula quickly dissolves stubborn grease and oil from engines, machinery, floors, trucks, and greasy equipment.  It is not recommended for use on aluminum. Care should be exercised when cleaning painted surfaces because it may damage paints if used too strong.  It is safe to use on iron, steel, stainless steel, galvanize, concrete, rubber, and plastic.

DIRECTIONS

Always test it on an inconspicuous area prior to use to test for adverse reaction.  It is easy and economical to use. Actual use concentration depends on the work to be done.

For light duty cleaning, dilute 1 part cleaner to 10 parts water.  Apply by spray or brush, allow to soak for a few minutes and scrub.  Rinse with water.

For heavy duty cleaning, dilute 1 part cleaner with 5 parts water.  Apply by spray or brush, allow to soak for a few minutes. Scrub with a brush and rinse with water.

For degreasing, dilute 1 part cleaner with 50 parts water and apply with a hot water high pressure washer.  Rinse well with water.

Do not allow it to dry on any surface because streaking may occur.

CAUTION

CAUSES BURNS.  HARMFUL IF ABSORBED THROUGH SKIN.  Contains sodium hydroxide and 2-butoxyethanol.  Wear safety goggles and chemical resistant gloves and shoes when handling.  Eye contact may cause severe burns or blindness. Immediately flush eyes with water for at least fifteen minutes, holding eyelids open to insure complete flushing, and get medical aid.  Skin contact may cause severe irritation or burns, flush thoroughly with water. Swallowing may cause severe irritation or damage to the mucous membranes of the mouth, throat, and digestive tract.  If swallowed, DO NOT INDUCE VOMITING, immediately drink water to dilute and get medical aid. If inhaled, get fresh air, and get medical aid.

WARRANTY

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN

Cold Wash Compound

COLD WASH COMPOUND

DEGREASER AND EMULSION CLEANER

DESCRIPTION

Cold Wash Compound is a blend of deep penetrating emulsifiers and solvents.  It is formulated to be kinder to the hands. It will dissolve and suspend heavy oils and grease.  Adding it to water forms an efficient emulsion cleaner. It forms a high quality, economical degreaser when diluted with solvent such as kerosene, stoddard solvent, and diesel fuel.

Cold Wash Compound penetrates and removes dirt, grease, and oils from metals, concrete, and other surfaces.  After greases and oils are dissolved and soils are suspended, they may be easily emulsified and flushed away with water spray.  It is recommended anywhere greasy soils are a problem. It may be used to clean engines, trucks, machinery, well drilling rigs, printing machines, office machines, and other greasy equipment.  It will remove bunker oils, motor sludge, oil spills, grease, tar, asphalt, and fuel oils. It is widely recommended in the marine industry as a bilge cleaner and emulsion degreaser.

APPLICATION

Use it full strength or mix it with kerosene, stoddard solvent, or diesel fuel.  Apply by brush, spray, or dip and allow to soak for a few minutes, then remove with water spray.  In removing bunker oil from deep tanks, use high pressure water for agitating and flushing.

NOTICE

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN

Bioterge

BIOTERGE

OIL AND GREASE DISPERSANT

NON TOXIC   * NON FLAMMABLE    * BIODEGRADABLE

FORMULATED ESPECIALLY FOR OIL FIELD USE


DESCRIPTION

BIO-TERGE is an exclusive formulation that chemically bonds with oil molecules and makes each molecule water soluble so that naturally occurring micro-organisms can break down the oil molecules and make them non-polluting and non-toxic. When oil is broken up into individual molecules and made water soluble, it disperses, down into water and can no longer “float up” to form slicks and sheens on the surface of the water. This scattering effect also brings the oil more quickly into contact with naturally occurring micro-organisms and speeds biodegradation of it. The oil is so widely dispersed that it cannot coat beaches, or birds and animals that live and feed in the water. BIO-TERGE solubilizes hydrocarbon solvents and makes them non-flammable when properly dispersed in water in unconfined areas.

 

Grimebuster

Need Content for this Page

Atlas

ATLAS

CONCENTRATE

DESCRIPTION

Concentrated for full strength cleaning.  Use it full strength for heavy duty cleaning or dilute with water for lighter jobs.  It emulsifies and removes grease, oils, and soils from surfaces being cleaned. It suspends dirt and foreign material and allows it to be wiped or flushed away.  Safe to use on most finishes and is recommended for cleaning engines and underhood painted surfaces, aluminum, whitewall tires, walls floors, vinyl upholstery, lawn furniture, outdoor grills, ceramic tile, porcelain fixtures, fiberglass boats, and glass.  It is excellent for use in steam cleaning machines and high pressure washers. It will remove oil, grease, dirt, road film, heel marks, finger prints, and kitchen grease.

DIRECTIONS

Atlas is concentrated and should diluted for optimum economy.  Every cleaning job is different and the following usage guidelines should be modified to suit the conditions at hand

  • For all purpose cleaning, dilute 1 part cleaner with 50 to 75 parts water.
  • Whitewall tires, dilute 1 part cleaner with 5 parts water.
  • Heavy soils such as floors, outdoor grills, fiberglass boats, machinery, engines, and greasy tools, dilute 1 part cleaner with 10 parts water.
  • For steam cleaning and high pressure washing, dilute 1 part cleaner with 75 to 100 parts water.

CAUTION

Avoid contact with eyes and skin.  Do not take internally. In case of eye contact, immediately flush with water for at least fifteen minutes and consult physician if irritation persists.  If swallowed, DO NOT INDUCE VOMITING, drink large amounts of water and consult physician. In case of skin contact, flush with water.

WARRANTY

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond the replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN

Aquaterge

AQUATERGE

CONCENTRATE

DESCRIPTION

Concentrated for full strength cleaning.  Use it full strength for heavy duty cleaning or dilute it with water for lighter jobs.  It emulsifies and removes grease, oils, and soils from surfaces being cleaned. It suspends dirt and foreign material and allows it to be wiped or flushed away.  Safe to use on most finishes and is recommended for cleaning engines and under-hood painted surfaces, aluminum, whitewall tires, walls floors, vinyl upholstery, lawn furniture, outdoor grills, ceramic tile, porcelain fixtures, fiberglass boats, and glass.  It is excellent for use in steam cleaning machines and high pressure washers. It will remove oil, grease, dirt, road film, heel marks, fingerprints, and kitchen grease.

DIRECTIONS

Aquaterge is concentrated and should be diluted for optimum economy.  

For all purpose cleaning, dilute 1 part cleaner with 50 to 75 parts water.

Whitewall tires, dilute 1 part cleaner with 5 parts water.

Heavy soils such as floors, outdoor grills, fiberglass boats, machinery, engines, and greasy tools, dilute 1 part cleaner with 10 parts water.

For steam cleaning and high pressure washing, dilute 1 part cleaner with 75 to 100 parts water.

CAUTION

Avoid contact with eyes and skin.  Do not take internally. In case of eye contact, immediately flush with water for at least fifteen minutes and consult physician if irritation persists.  If swallowed, DO NOT INDUCE VOMITING, drink large amounts of water and consult physician. In case of skin contact, flush with plenty of water.

WARRANTY

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond the replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN

All Pro

ALL PRO

PROFESSIONAL STRENGTH

DEGREASER CONCENTRATE

Extremely powerful and versatile, ALL PRO is made with high performance ingredients to provide fast and effective removal of stubborn baked-on grease, oil, and soils from engines, machinery, floors, trucks, and greasy equipment. It is safe to use on iron, steel, stainless steel, galvanize, concrete, rubber, and plastic.  It may damage aluminum. If used too strong it may damage some paints.

DIRECTIONS

Always test it for adverse reaction on an inconspicuous area. Easy and economical to use, actual use concentration depends on the work to be done.

For light duty cleaning, dilute 1 part ALL PRO with 6-10 parts water.  Apply by spray or brush, allow to soak for a few minutes and scrub.  Rinse with water.

For heavy duty cleaning, dilute 1 part ALL PRO with 10-100 parts water.  Apply by spray or brush, allow to soak for a few minutes.  Scrub with a brush and rinse with water.

For degreasing, dilute 1 part ALL PRO with 50 parts water and apply with a hot water high pressure washer.  Rinse well with water.

Do not allow it to dry on any surface to avoid streaking.

CAUTION

CAUSES BURNS.  HARMFUL IF ABSORBED THROUGH SKIN.  Contains sodium hydroxide and 2-butoxyethanol.  Wear safety goggles and chemical resistant gloves and shoes when handling.  Eye contact may cause severe burns or blindness. Immediately flush eyes with water for at least fifteen minutes, holding eyelids open to insure complete flushing, and get medical aid.  Skin contact may cause severe irritation or burns, flush thoroughly with water. Swallowing may cause severe irritation or damage to the mucous membranes of the mouth, throat, and digestive tract.  If swallowed, DO NOT INDUCE VOMITING, immediately drink water to dilute and get medical aid. If inhaled, get fresh air, and get medical aid.

WARRANTY

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond replacement of defective product is offered.

Alkadet

ALKADET

COIL CLEANER CONCENTRATE

BIODEGRADABLE

DESCRIPTION

Dirt, grease, and oil accumulation on evaporator and condenser coils can reduce the efficiency of your air conditioning system.  Save time and money, improve heat transfer efficiency, and prevent costly breakdowns by using ALKADET coil cleaner to remove foreign matter from air conditioning systems.

ALKADET contains surfactants, emulsifiers, and penetrants designed to easily and quickly remove dirt, grease, and oily soils from evaporators, condensers, fan blades, blowers, and grills.  It is excellent for most other cleaning jobs when properly diluted.

DIRECTIONS

Each cleaning job is different, therefore, the following directions are to be used only as a guide.  Use dilution should be adjusted to suit the conditions of each application.

Condensers:  Dilute 1 part cleaner with 5 parts water.  Spray on coil and allow to soak for a few minutes.  Rinse grease, oil, and soils away with water spray.

Evaporators:  Dilute 1 part cleaner with 10 parts water.  Spray on coil and allow to soak for a few minutes.  Turn unit on and let condensate flush soils away. Rinsing is not normally necessary.

Fan blades, Blowers, Grills, Filters, etc.:  Dilute 1 part cleaner with 20 parts water and spray on surface to be cleaned.  Scrub with a brush if necessary. Rinse well.

CAUTION

Eye contact may cause severe irritation.  May be harmful if swallowed. In case of skin contact, flush with water.  In case of eye contact, flush with water for at least 15 minutes and get medical aid if irritation persists.  If swallowed, DO NOT INDUCE VOMITING, drink large amounts of water and get medical aid.  

NOTICE

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN