Parts Washer Solvent

PARTS WASHER SOLVENT

DESCRIPTION

This is a high quality, high flash point, low odor petroleum solvent.  Use it in soak tanks or recirculating solvent parts washers. It rapidly and safely removes even stubborn, baked on grease from all metals, and most rubber and plastics.  It won’t cause rust or corrosion.

It is recommended for use in Automotive Repair Shops, Car and Truck Dealers, Heavy Equipment Dealers, Marine Repair Yards, Oil Wells, Industrial Maintenance, Public Works Departments, Railroad Maintenance, Building Maintenance, and anywhere that grease and oil are a problem.

Oil reclaimers can use the spent solvent in fuel oil if it is not contaminated with carburetor cleaners, flammable solvents, etc.  

DIRECTIONS

It is ready to use in soak tanks and re-circulating solvent parts washers.  Apply by spray, brush, rag, or dipping. Allow to soak, or scrub with a brush.  Wipe dry with a towel or let it air dry.

CAUTION

Wear protective gloves and eye protection when using solvents.

Eye contact causes irritation.  Immediately remove contact lenses and flush eyes with plenty of water, lifting eyelids to insure thorough flushing.

Skin contact may cause irritation.  Repeated or prolonged skin contact may de-fat the skin.  Wash with soap and water.

Inhalation of excessive amounts of vapors or spray mists may cause respiratory irritation.  Remove to fresh air.

Ingestion may be harmful.  Aspiration hazard if swallowed.

WARRANTY

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond the replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN

MAXX-BRIGHT

SUPER CONCENTRATED

ALUMINUM BRIGHTENER AND CLEANER

DESCRIPTION

This highly concentrated, heavy duty cleaning and brightening agent removes unsightly oxidation, diesel smoke, oil, and dirt from aluminum surfaces.  It removes the most stubborn soils and produces a fresh, new aluminum surface. It contains acids, penetrants, detergents, and emulsifiers in combination designed to provide efficiency and economy in cleaning aluminum.

DIRECTIONS

MAXX-BRIGHT should be diluted with water.  Solution concentration will depend upon the job and equipment available, although the usual ratio is 1 part cleaner to 15 parts water.  It may be applied by spray or brush. The surface to be cleaned should first be wet with water and MAXX-BRIGHT applied from the bottom up to prevent streaking.  Agitate the surface with a brush if necessary and allow the cleaner to remain on the surface for approximately ten minutes; do not allow to dry. If allowed to dry on the vehicle, streaking may occur.  Flush thoroughly with water to remove cleaner and stop it’s action.

CAUTION

Contains sulfuric acid and ammonium bilfuoride, corrosive and poison.  May cause burns to eyes and skin. May be harmful if swallowed. In case of eye contact, flush with plenty of water for at least 15 minutes, and get medical aid.  In case of skin contact, flush with water and get medical aid if needed. If swallowed, DO NOT INDUCE VOMITING, drink large amounts of water and get medical aid immediately.

WARRANTY

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN

Luma Bright

LUMA BRIGHT

CONCENTRATE

DESCRIPTION

This is a heavy duty cleaning and brightening agent which removes oxidation, diesel smoke, oil, and dirt from aluminum surfaces, producing a lustrous satin appearance.  It contains acids, penetrants, and emulsifiers in combination designed to provide efficiency and economy in cleaning aluminum.

INSTRUCTIONS

LUMA BRIGHT should be diluted with water.  Solution concentration will depend upon the job and equipment available, although the usual ratio is 1 part cleaner to 9 parts water.  It may be applied by brush, or spray. The surface to be cleaned should first be wet with water and LUMA BRIGHT applied from the bottom up to prevent streaking.  Scrub the surface with a brush if necessary and allow the cleaner to remain on the surface for a short time, but do not allow it to dry. If allowed to dry on the vehicle, streaking may occur.  Flush thoroughly with water to remove cleaner and stop it’s action.

CAUTION

Corrosive-contains Phosphoric Acid.  May cause burns to eyes and skin. May be harmful if swallowed.  In case of eye contact, flush with plenty of water for at least fifteen minutes, and get medical aid.  In case of skin contact, flush with water and get medical aid if needed. If swallowed, DO NOT INDUCE VOMITING, drink large amounts of water and get medical aid immediately.

NOTICE

Mobile solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond the replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN

High Gloss Dressing

HIGH GLOSS DRESSING

VINYL AND TIRE DRESSING

DESCRIPTION

HIGH GLOSS DRESSING is a mixture of solvents and protectants which extends the life of vinyl and rubber.  It helps to keep the surface moist and prevent cracking and drying. It cleans the surface and restores the original color and appearance.  It makes tires appear black and shiny.

DIRECTIONS

Simply apply it evenly with cloth, sponge, or spray to a clean dry surface.  Just wipe it on and let it dry.

CAUTION

Combustible mixture.  Eye contact may cause irritation.  In case of eye contact, flush with water for at least fifteen minutes and get medical aid if needed.  Repeated or prolonged skin contact may cause irritation. In case of skin contact, flush with water. Ingestion may be harmful.  If swallowed, DO NOT INDUCE VOMITING, drink water and get medical aid.

WARRANTY

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since manufacturer cannot control conditions or method of application, no warranty or liability beyond replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN

HD COMPOUND

STEAM CLEANING COMPOUND

DESCRIPTION

HD COMPOUND is a heavy duty liquid alkaline compound containing a balanced combination of alkalis, synthetic detergents, sequestrants, and solvents.  It is completely soluble in water in all proportions. It’s heavy emulsifying action promotes rapid removal of soils and greases.

HD COMPOUND is designed for steam cleaning engines, machinery, floors, trucks, and greasy equipment.  It is not recommended for use on aluminum. Care should be exercised when cleaning painted surfaces because it may damage paints if used too strong. It is safe on ferrous metals, stainless steel, galvanize, concrete, rubber, and plastic.

DIRECTIONS

HD COMPOUND is easy and economical to use.  Actual use concentration depends on the work to be done.

STEAM CLEANING:  Dilute 1 part cleaner with 50 parts water.  Rinse well with water after cleaning.

HAND OPERATIONS:  Dilute 1 part cleaner with 20 parts water.  Rinse well with water after cleaning.

CAUTION

Contains sodium hydroxide,  which is corrosive. Eye contact may cause severe burns or blindness.  In case of eye contact, immediately flush with water for at least 15 minutes and get medical aid.  Skin contact may cause severe irritation or chemical burns.  In case of skin contact, flush with water. Ingestion may cause severe irritation or damage to the mucous membranes of the mouth, throat, and digestive tract.  If swallowed, DO NOT INDUCE VOMITING, immediately drink large amounts of water and get medical aid.

NOTICE

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN

      

Compound HD50

COMPOUND HD50

PROFESSIONAL STRENGTH

INDUSTRIAL DEGREASER

DESCRIPTION

It is an extremely powerful and versatile cleaner and degreaser.  Its high performance formula quickly dissolves stubborn grease and oil from engines, machinery, floors, trucks, and greasy equipment.  It is not recommended for use on aluminum. Care should be exercised when cleaning painted surfaces because it may damage paints if used too strong.  It is safe to use on iron, steel, stainless steel, galvanize, concrete, rubber, and plastic.

DIRECTIONS

Always test it on an inconspicuous area prior to use to test for adverse reaction.  It is easy and economical to use. Actual use concentration depends on the work to be done.

For light duty cleaning, dilute 1 part cleaner to 10 parts water.  Apply by spray or brush, allow to soak for a few minutes and scrub.  Rinse with water.

For heavy duty cleaning, dilute 1 part cleaner with 5 parts water.  Apply by spray or brush, allow to soak for a few minutes. Scrub with a brush and rinse with water.

For degreasing, dilute 1 part cleaner with 50 parts water and apply with a hot water high pressure washer.  Rinse well with water.

Do not allow it to dry on any surface because streaking may occur.

CAUTION

CAUSES BURNS.  HARMFUL IF ABSORBED THROUGH SKIN.  Contains sodium hydroxide and 2-butoxyethanol.  Wear safety goggles and chemical resistant gloves and shoes when handling.  Eye contact may cause severe burns or blindness. Immediately flush eyes with water for at least fifteen minutes, holding eyelids open to insure complete flushing, and get medical aid.  Skin contact may cause severe irritation or burns, flush thoroughly with water. Swallowing may cause severe irritation or damage to the mucous membranes of the mouth, throat, and digestive tract.  If swallowed, DO NOT INDUCE VOMITING, immediately drink water to dilute and get medical aid. If inhaled, get fresh air, and get medical aid.

WARRANTY

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN

Hand Soap Concentrate

HAND SOAP

CONCENTRATE

DESCRIPTION

HAND SOAP is formulated to remove even stubborn grease and dirt, but its coconut oil base makes it milder to the hands.  It doesn’t dry the skin and leave it chapped like other soaps. Even frequent washing leaves the hands moist and soft.

 

DIRECTIONS

Wet the hands with water.  Apply a generous amount of soap and rub the hands together to remove grease and grime.  For stubborn soils, scrub the hands with a hand-scrub brush. Rinse with water.

NOTICE

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN

Hand and Body Soap

HAND & BODY SOAP

DESCRIPTION

This is a thick, rich formulation designed for use in showers and tubs.  It leaves the hands and body soft and smooth, with a fresh clean feel. It does not contain solvents or harsh chemicals which dry and chap the hands.

INSTRUCTIONS

Rub it in thoroughly to remove grease and grime.  Rinse with water and dry.

CAUTION

Eye contact may cause irritation.  Ingestion may be harmful. In case of eye contact, rinse well with water.  If swallowed, do not induce vomiting, get medical aid.

WARRANTY

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond the replacement of defective product is offered.

Sparkles Glass Cleaner

SPARKLES

GLASS CLEANER CONCENTRATE

DESCRIPTION

GLASS CLEANER is a highly concentrated cleaner for any smooth, hard surface.  It is recommended for cleaning windows, mirrors, show cases, computer screens, counter tops, porcelain and other hard surfaces.  It will remove hand prints, smudges, grease, and dirt spots. Surfaces will be left clean and dust free.

DIRECTIONS

For light duty cleaning, dilute two to three ounces to one gallon of water.

For heavy duty cleaning, increase concentration as desired.

May be applied by spray, sponge, or cloth.  Spray a light film over the surface to be cleaned and wipe dry with a paper towel or clean lint free cloth.  When applying by sponge or cloth, pour a small amount on sponge or cloth and wipe onto surface to be cleaned.  Wipe clean with paper towel or clean lint free cloth.

CAUTION

Flammable liquid. Contains alcohol. Eye irritant.  May be harmful if swallowed. In case of eye contact, flush with large amounts of water for at least fifteen minutes and get medical aid if needed.  If swallowed, DO NOT INDUCE VOMITING, get medical aid immediately

WARRANTY

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond the replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN

Fleet Clean

FLEET CLEAN

VEHICLE CLEANER

DESCRIPTION

FLEET CLEAN is a concentrated liquid compound which removes road film.  It is inhibited to be safe on glass, paints, decals, and on the hands of the user.  It is a high foaming compound which contains no harsh alkalis. Delicate surfaces will not be harmed if the user accidentally uses too much detergent.  It will not streak automotive surfaces.

DIRECTIONS

The vehicle should be rinsed prior to being washed to remove gritty soils which may scratch the surfaces.  Mechanical washers should use FLEET CLEAN at a concentration of 50:1 to 100:1, with water. FLEET CLEAN should be used in pressure wash equipment at a concentration of 25:1 to 50:1.  Just spray on, allow to soak for a minute or two and wash with pressure to remove road film. Rinse well. For hand washing operations, use 1-4 ounces per gallon of water, depending on the degree of contamination.  Rinse well. Do not allow FLEET CLEAN to dry on the surface being cleaned.

CAUTION

Eye contact may cause irritation.  In case of eye contact, flush with water for at least fifteen minutes and get medical aid if needed.  Repeated or prolonged skin contact may cause irritation. In case of skin contact, flush with water. May be harmful if swallowed.  If swallowed, DO NOT INDUCE VOMITING, drink water to dilute and get medical aid.

WARRANTY

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond the replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN