DYNAMO

FAST●BIODEGRADABLE●SAFE

HIGH PERFORMANCE CONCRETE REMOVER

DESCRIPTION

DYNAMO is 100% biodegradable and is environmentally friendly.  It is odorless and non-fuming. It does not contain hydrochloric, muriatic, phosphoric, or sulfuric acids that  damage trucks and equipment. It dissolves built-up concrete without harming trucks and equipment. It is non-corrosive, non-flammable and non-hazardous to equipment. It is effective in removing built-up cement, concrete, mortar, grout and drywall from any surface.  Use it to clean painted surfaces, aluminum, steel, brick, wood, plastic, glass, fiberglass, and rubber. It excels in cleaning ready-mix trucks, mixers, trowels, tools, forms, molds, walls, aluminum window frames, patios, and wooden decks.

DIRECTIONS

DYNAMO is formulated to be used full strength on heavy deposits but it may be diluted for economy on light duty cleaning.  Apply it with spray or brush and allow it to soak for a few minutes. Repeat the application if concrete deposits are heavy.  Do not rinse between applications, but keep the area wet with DYNAMO until concrete is completely soft. Wash the softened concrete away with water using as much pressure as possible.

CAUTION

Eye contact may cause irritation.  Flush eyes immediately with water for at least fifteen minutes, holding eyelids open to insure thorough flushing.  Get medical aid if needed. Inhalation of mists may cause respiratory tract irritation. If inhaled, remove to fresh air. Get medical aid if needed.  Skin contact may cause irritation. Wash exposed area thoroughly with soap and water. Wash contaminated clothing before re-use. Ingestion may cause irritation of digestive tract.  If swallowed, do not induce vomiting, get medical aid.

WARRANTY

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN

DYNAFOAM

FAST●BIODEGRADABLE●SAFE

HIGH PERFORMANCE CONCRETE REMOVER

DESCRIPTION

Apply it with a foam gun to minimize drippage.  DYNAFOAM is 100% biodegradable and is environmentally friendly.  It is odorless and non-fuming. It does not contain hydrochloric, muriatic, phosphoric, or sulfuric acids that  damage trucks and equipment. It dissolves built-up concrete without harming trucks and equipment. It is non-corrosive, non-flammable and non-hazardous to equipment. It is effective in removing built-up cement, concrete, mortar, grout and drywall from any surface.  Use it to clean painted surfaces, aluminum, steel, brick, wood, plastic, glass, fiberglass, and rubber. It excels in cleaning ready-mix trucks, mixers, trowels, tools, forms, molds, walls, aluminum window frames, patios, and wooden decks.

DIRECTIONS

DYNAFOAM is formulated to be used full strength on heavy deposits but it may be diluted for economy on light duty cleaning.  Apply it with foam gun and allow it to soak for a few minutes. Repeat the application if concrete deposits are heavy. Do not rinse between applications, but keep the area wet with DYNAFOAM until concrete is completely soft.  Wash the softened concrete away with water using as much pressure as possible.

CAUTION

Eye contact may cause irritation.  Flush eyes immediately with water for at least fifteen minutes, holding eyelids open to insure thorough flushing.  Get medical aid if needed. Inhalation of mists may cause respiratory tract irritation. If inhaled, remove to fresh air. Get medical aid if needed.  Skin contact may cause irritation. Wash exposed area thoroughly with soap and water. Wash contaminated clothing before re-use. Ingestion may cause irritation of digestive tract.  If swallowed, do not induce vomiting, get medical aid.

WARRANTY

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN

CONCRETE REMOVER HD

CONCRETE TRUCK CLEANER

DESCRIPTION

CONCRETE REMOVER HD is a muriatic acid formulation designed to remove concrete from trucks, mixing equipment, bricks, ceramic tile, and most metallic surfaces.  It is a strong acid mixture which is inhibited to minimize attack on metal surfaces. Do not use on aluminum or magnesium surfaces.

DIRECTIONS

For heavy build-up, use full strength.  For light duty cleaning, dilute with water as needed.  Apply by spray or brush. Allow to remain on the surface being cleaned until concrete deposits are removed.  Rinse thoroughly with water. Repeat application if necessary.

CAUTION

Contains hydrochloric acid, UN 1789.  Harmful or fatal if swallowed. If swallowed, DO NOT INDUCE VOMITING, drink large amounts of water to dilute and get medical aid.  Will cause severe eye irritation and may cause skin irritation. In case of eye contact, flush with water for at least 15 minutes and get medical aid.  In case of skin contact, flush with water. Wear protective gloves, boots, goggles, etc. sufficient to prevent bodily contact. Poison.

WARRANTY

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN

CON-FORM

BIODEGRADABLE FORM RELEASE

DESCRIPTION

CON-FORM is specially formulated to provide easy form removal and a smooth concrete finish by preventing the buildup of concrete on metal, plastic, or wood forms. It has been formulated to provide  clean, quick-release characteristics while leaving a smooth, stain-free finish. CON-FORM helps to minimize the cleanup of equipment as it doesn’t leave a product film or build-up on the form. It is also low odor, biodegradable and low VOC. CON-FORM is easily applied and it comes ready to use. This is a vegetable oil product which does not contain any silicone.

                                                  APPLICATION

CON-FORM can be applied by brush, roller, or spray. It can be used on concrete structural units, precast concrete panels, and pre-stressed bridge beams. It also works well on concrete pipe, septic tanks, and concrete poles and pilings.

FIRST AID

EYES: Immediately, flush eyes with water for at least fifteen minutes.  Get medical aid if irritation persists.

SKIN: Flush skin with plenty of water.  Get medical aid if irritation develops and persists.  INHALATION: Move to fresh air. Use artificial respiration if needed using proper respiratory medical device.  Get medical aid immediately if needed.

INGESTION: Do not induce vomiting.  Get medical aid immediately.

NOTICE

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond replacement of defective product is offered.

◆ KEEP OUT OF REACH OF CHILDREN ◆