COIL CLEANER CONCENTRATE
RE-NEW is a system of surfactants, emulsifiers, penetrants, and alkali. It is a highly alkaline, corrosive coil cleaner which etches aluminum surfaces of condensers and evaporators. It’s etching action removes oxides, corrosion scale, grease, oil, and dirt, and leaves fin surfaces clean and bright for most efficient heat transfer. It should be diluted with water to control the etch rate and to provide optimum economy.
CONDENSERS: Dilute 1 part cleaner with 6 parts water for heavy duty cleaning. Spray on coil and allow to soak for a few minutes. Rinse grease, oil, and soils away with water spray.
EVAPORATORS: Dilute 1 part cleaner with 10 parts water. Spray on and allow to soak for a few minutes. Rinse thoroughly with water.
Corrosive material, contains Sodium Hydroxide. Eye contact will cause severe burns or blindness. Skin contact may cause severe irritation or burns. Ingestion will cause severe irritation or burns to mouth, throat, and digestive tract. Inhalation of concentrated spray mist will cause burns to airway. Eye contact, flush with water for at least fifteen minutes, and get medical aid. Skin contact, flush with water. Ingestion, drink water and get medical aid. Inhalation, get medical aid.
Mobile Solvent & Supply, Inc. products are safe and effective when used as directed. When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond the replacement of defective product is offered.
KEEP OUT OF REACH OF CHILDREN