This is a heavy duty cleaning and brightening agent which removes oxidation, diesel smoke, oil, and dirt from aluminum surfaces, producing a lustrous satin appearance.  It contains acids, penetrants, and emulsifiers in combination designed to provide efficiency and economy in cleaning aluminum.


LUMA BRIGHT should be diluted with water.  Solution concentration will depend upon the job and equipment available, although the usual ratio is 1 part cleaner to 9 parts water.  It may be applied by brush, or spray. The surface to be cleaned should first be wet with water and LUMA BRIGHT applied from the bottom up to prevent streaking.  Scrub the surface with a brush if necessary and allow the cleaner to remain on the surface for a short time, but do not allow it to dry. If allowed to dry on the vehicle, streaking may occur.  Flush thoroughly with water to remove cleaner and stop it’s action.


Corrosive-contains Phosphoric Acid.  May cause burns to eyes and skin. May be harmful if swallowed.  In case of eye contact, flush with plenty of water for at least fifteen minutes, and get medical aid.  In case of skin contact, flush with water and get medical aid if needed. If swallowed, DO NOT INDUCE VOMITING, drink large amounts of water and get medical aid immediately.


Mobile solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond the replacement of defective product is offered.


About Joe White