FLEET CLEAN is a concentrated liquid compound which removes road film.  It is inhibited to be safe on glass, paints, decals, and on the hands of the user.  It is a high foaming compound which contains no harsh alkalis. Delicate surfaces will not be harmed if the user accidentally uses too much detergent.  It will not streak automotive surfaces.


The vehicle should be rinsed prior to being washed to remove gritty soils which may scratch the surfaces.  Mechanical washers should use FLEET CLEAN at a concentration of 50:1 to 100:1, with water. FLEET CLEAN should be used in pressure wash equipment at a concentration of 25:1 to 50:1.  Just spray on, allow to soak for a minute or two and wash with pressure to remove road film. Rinse well. For hand washing operations, use 1-4 ounces per gallon of water, depending on the degree of contamination.  Rinse well. Do not allow FLEET CLEAN to dry on the surface being cleaned.


Eye contact may cause irritation.  In case of eye contact, flush with water for at least fifteen minutes and get medical aid if needed.  Repeated or prolonged skin contact may cause irritation. In case of skin contact, flush with water. May be harmful if swallowed.  If swallowed, DO NOT INDUCE VOMITING, drink water to dilute and get medical aid.


Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond the replacement of defective product is offered.


About Joe White

No Comments

Be the first to start a conversation

Leave a Reply

Your email address will not be published. Required fields are marked *