Leak Detector Solution

LEAK DETECTOR

SOLUTION

DESCRIPTION

Leak Detector Solution is a salt-free, non-alkaline, biodegradable, water base combination of foaming agents designed to detect leaks in tanks, refrigeration systems, and other pressurized vessels.

INSTRUCTIONS

Use it full strength or dilute with water as desired. Apply by brush, spray, or squeeze bottle. Rinsing is not necessary in most cases, however, if the item is to be painted, the user should test effect of Leak Detector on paint adhesion.

CAUTION

May cause eye irritation. In case of eye contact, flush with water.

NOTICE

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed. When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond the replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN

Hot Tank Compound

HOT TANK COMPOUND

DEGREASER, DERUSTER,

AND PAINT REMOVER

DESCRIPTION

HOT TANK COMPOUND is a heavy duty liquid alkaline product used to clean ferrous metals by the hot vat soaking method.  It removes rust, grease, oils, engine varnish, grime, heat-hardened resins, tar, and other stubborn soils. It cleans automobile radiators quickly and thoroughly.  Mechanical agitation may be used if desired. Agitation reduces immersion time by producing a scrubbing effect on the parts being cleaned.

DIRECTIONS

HOT TANK COMPOUND should be used at 10 – 15 percent concentration and heated to 200° F. or higher.  Immersion times may vary from a few minutes to about two hours depending on concentration, temperature, and agitation.  A pressure rinse with water is used to flush away the loosened soils.

When charging the tank, fill half full with cold water.  Add HOT TANK COMPOUND slowly with mixing. Heat will be generated when the compound is added to the water.  Add remainder of water and heat the tank.

CAUTION

Corrosive, contains sodium hydroxide, UN 1824.  Corrosive to animal tissues. Eye contact may cause severe burns or blindness.  In case of eye contact, immediately flush with water for at least 15 minutes and get medical aid.  Skin contact may cause severe irritation or chemical burns.  In case of skin contact, flush with water. Ingestion may cause severe irritation or damage to the mucous membranes of the mouth, throat, and digestive tract.  If swallowed, DO NOT INDUCE VOMITING, immediately drink large amounts of water and get medical aid.

NOTICE

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN

Re-New

RE-NEW

COIL CLEANER CONCENTRATE

 NON ACID   

DESCRIPTION

RE-NEW is a  system of surfactants, emulsifiers, penetrants, and alkali.  It is a highly alkaline, corrosive coil cleaner which etches aluminum surfaces of condensers and evaporators.  It’s etching action removes oxides, corrosion scale, grease, oil, and dirt, and leaves fin surfaces clean and bright for most efficient heat transfer.  It should be diluted with water to control the etch rate and to provide optimum economy.

INSTRUCTIONS

CONDENSERS: Dilute 1 part cleaner with 6 parts water for heavy duty cleaning.  Spray on coil and allow to soak for a few minutes. Rinse grease, oil, and soils away with water spray.  

EVAPORATORS: Dilute 1 part cleaner with 10 parts water.  Spray on and allow to soak for a few minutes. Rinse thoroughly with water.

CAUTION

Corrosive material, contains Sodium Hydroxide.  Eye contact will cause severe burns or blindness.  Skin contact may cause severe irritation or burns. Ingestion will cause severe irritation or burns to mouth, throat, and digestive tract.  Inhalation of concentrated spray mist will cause burns to airway. Eye contact, flush with water for at least fifteen minutes, and get medical aid.  Skin contact, flush with water. Ingestion, drink water and get medical aid. Inhalation, get medical aid.

NOTICE

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed. When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond the replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN