Brake and Parts Cleaner

BRAKE & PARTS CLEANER

•NO CHLORINATED OR FLUORINATED SOLVENTS•

  • REMOVES BRAKE FLUID, GREASE, AND OIL•
  • CONTAINS NO LEAD, PHOSPHORUS, OR SILICONE•

DESCRIPTION

This highly concentrated solvent blend provides maximum performance in a brake parts cleaner without the use of ozone depleters or chlorinated solvents.  It easily removes brake fluid, grease, oily dirt and contaminants from linings, pads, drums, cylinders and springs without disassembling the brake unit.

DIRECTIONS

Spray brake parts liberally and allow to run off.  Allow to air dry. Repeat as necessary. Protect rubber and plastic parts from spray.  Do not spray on hot surfaces.

CAUTION

Flammable mixture.  Flammable vapors are heavier than air and may collect in low areas or pits.  Vapors may travel long distances from point of use and be ignited by sparks, smoking, flames, heaters, electrical equipment, static discharge, or other ignition sources.  Provide adequate ventilation during use. Waste oil contaminated with this product poses a flammability hazard.

Contains petroleum distillates.  Skin contact may produce skin irritation.  Wash with soap and water. Eye contact may produce severe irritation. Flush thoroughly with plenty of water for at least fifteen minutes, lifting eyelids periodically.   Inhalation of mist or vapor may produce respiratory tract irritation. Move victim to fresh air. If breathing does not return to normal after a few minutes, get medical attention.  If swallowed, DO NOT INDUCE VOMITING, call a physician immediately.

WARRANTY

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN

High Gloss Tire Dressing

FLEET CLEAN

VEHICLE CLEANER

DESCRIPTION

FLEET CLEAN is a concentrated liquid compound which removes road film.  It is inhibited to be safe on glass, paints, decals, and on the hands of the user.  It is a high foaming compound which contains no harsh alkalis. Delicate surfaces will not be harmed if the user accidentally uses too much detergent.  It will not streak automotive surfaces.

DIRECTIONS

The vehicle should be rinsed prior to being washed to remove gritty soils which may scratch the surfaces.  Mechanical washers should use FLEET CLEAN at a concentration of 50:1 to 100:1, with water. FLEET CLEAN should be used in pressure wash equipment at a concentration of 25:1 to 50:1.  Just spray on, allow to soak for a minute or two and wash with pressure to remove road film. Rinse well. For hand washing operations, use 1-4 ounces per gallon of water, depending on the degree of contamination.  Rinse well. Do not allow FLEET CLEAN to dry on the surface being cleaned.

CAUTION

Eye contact may cause irritation.  In case of eye contact, flush with water for at least fifteen minutes and get medical aid if needed.  Repeated or prolonged skin contact may cause irritation. In case of skin contact, flush with water. May be harmful if swallowed.  If swallowed, DO NOT INDUCE VOMITING, drink water to dilute and get medical aid.

WARRANTY

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond the replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN