Atlas

ATLAS

CONCENTRATE

DESCRIPTION

Concentrated for full strength cleaning.  Use it full strength for heavy duty cleaning or dilute with water for lighter jobs.  It emulsifies and removes grease, oils, and soils from surfaces being cleaned. It suspends dirt and foreign material and allows it to be wiped or flushed away.  Safe to use on most finishes and is recommended for cleaning engines and underhood painted surfaces, aluminum, whitewall tires, walls floors, vinyl upholstery, lawn furniture, outdoor grills, ceramic tile, porcelain fixtures, fiberglass boats, and glass.  It is excellent for use in steam cleaning machines and high pressure washers. It will remove oil, grease, dirt, road film, heel marks, finger prints, and kitchen grease.

DIRECTIONS

Atlas is concentrated and should diluted for optimum economy.  Every cleaning job is different and the following usage guidelines should be modified to suit the conditions at hand

  • For all purpose cleaning, dilute 1 part cleaner with 50 to 75 parts water.
  • Whitewall tires, dilute 1 part cleaner with 5 parts water.
  • Heavy soils such as floors, outdoor grills, fiberglass boats, machinery, engines, and greasy tools, dilute 1 part cleaner with 10 parts water.
  • For steam cleaning and high pressure washing, dilute 1 part cleaner with 75 to 100 parts water.

CAUTION

Avoid contact with eyes and skin.  Do not take internally. In case of eye contact, immediately flush with water for at least fifteen minutes and consult physician if irritation persists.  If swallowed, DO NOT INDUCE VOMITING, drink large amounts of water and consult physician. In case of skin contact, flush with water.

WARRANTY

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond the replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN

Re-New

RE-NEW

COIL CLEANER CONCENTRATE

 NON ACID   

DESCRIPTION

RE-NEW is a  system of surfactants, emulsifiers, penetrants, and alkali.  It is a highly alkaline, corrosive coil cleaner which etches aluminum surfaces of condensers and evaporators.  It’s etching action removes oxides, corrosion scale, grease, oil, and dirt, and leaves fin surfaces clean and bright for most efficient heat transfer.  It should be diluted with water to control the etch rate and to provide optimum economy.

INSTRUCTIONS

CONDENSERS: Dilute 1 part cleaner with 6 parts water for heavy duty cleaning.  Spray on coil and allow to soak for a few minutes. Rinse grease, oil, and soils away with water spray.  

EVAPORATORS: Dilute 1 part cleaner with 10 parts water.  Spray on and allow to soak for a few minutes. Rinse thoroughly with water.

CAUTION

Corrosive material, contains Sodium Hydroxide.  Eye contact will cause severe burns or blindness.  Skin contact may cause severe irritation or burns. Ingestion will cause severe irritation or burns to mouth, throat, and digestive tract.  Inhalation of concentrated spray mist will cause burns to airway. Eye contact, flush with water for at least fifteen minutes, and get medical aid.  Skin contact, flush with water. Ingestion, drink water and get medical aid. Inhalation, get medical aid.

NOTICE

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed. When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond the replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN