ALUMINUM BRIGHTENER

EC
DESCRIPTION

This is an economical cleaning and brightening agent designed to remove oxidation, diesel smoke, oil,
and dirt from aluminum surfaces. It contains acids, penetrants, detergents, and emulsifiers in
combination designed to provide efficiency and economy in cleaning aluminum.

DIRECTIONS

Aluminum brightener should be diluted with water. Solution concentration will depend upon the job
and equipment available, although the usual ratio is 1 part cleaner to 5 parts water. It may be applied by
spray or brush. The surface to be cleaned should first be wet with water and aluminum brightener
applied from the bottom up to prevent streaking. Agitate the surface with a brush if necessary and allow
the cleaner to remain on the surface for approximately ten minutes; do not allow to dry. If allowed to
dry on the vehicle, streaking may occur. Flush thoroughly with water to remove cleaner and stop it's
action.

CAUTION

Contains sulfuric acid and ammonium bifluoride, UN 1786, corrosive and poison. May cause burns to
eyes and skin. May be harmful if swallowed. In case of eye contact, flush with plenty of water for at
least 15 minutes, and get medical aid. In case of skin contact, flush with water and get medical aid if
needed. If swallowed, DO NOT INDUCE VOMITING, drink large amounts of water and get medical
aid immediately.

WARRANTY

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed. When using as a
cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions
or method of application, no warranty or liability beyond replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN

About Joe White