ALKADET

COIL CLEANER CONCENTRATE

BIODEGRADABLE

DESCRIPTION

Dirt, grease, and oil accumulation on evaporator and condenser coils can reduce the efficiency of your air conditioning system.  Save time and money, improve heat transfer efficiency, and prevent costly breakdowns by using ALKADET coil cleaner to remove foreign matter from air conditioning systems.

ALKADET contains surfactants, emulsifiers, and penetrants designed to easily and quickly remove dirt, grease, and oily soils from evaporators, condensers, fan blades, blowers, and grills.  It is excellent for most other cleaning jobs when properly diluted.

DIRECTIONS

Each cleaning job is different, therefore, the following directions are to be used only as a guide.  Use dilution should be adjusted to suit the conditions of each application.

Condensers:  Dilute 1 part cleaner with 5 parts water.  Spray on coil and allow to soak for a few minutes.  Rinse grease, oil, and soils away with water spray.

Evaporators:  Dilute 1 part cleaner with 10 parts water.  Spray on coil and allow to soak for a few minutes.  Turn unit on and let condensate flush soils away. Rinsing is not normally necessary.

Fan blades, Blowers, Grills, Filters, etc.:  Dilute 1 part cleaner with 20 parts water and spray on surface to be cleaned.  Scrub with a brush if necessary. Rinse well.

CAUTION

Eye contact may cause severe irritation.  May be harmful if swallowed. In case of skin contact, flush with water.  In case of eye contact, flush with water for at least 15 minutes and get medical aid if irritation persists.  If swallowed, DO NOT INDUCE VOMITING, drink large amounts of water and get medical aid.  

NOTICE

Mobile Solvent & Supply, Inc. products are safe and effective when used as directed.  When using as a cleaner, always test a small area for adverse reaction. Since the manufacturer cannot control conditions or method of application, no warranty or liability beyond replacement of defective product is offered.

KEEP OUT OF REACH OF CHILDREN

About Joe White